Sizes are estimates from the off-the-shelf parts (Raspberry Pi 4, Freenove 4.3" DSI panel, standard V-lock plate). They'll firm up once the first print is test-fitted.
| Screen | 4.3" 800×480 touch, dark UI, brightness adjustable |
| Status light | Addressable light bar across the top edge: a segment per camera, upload sweeps, readable from across the set. Flicker-free APA102-class LEDs, dimmable or off |
| Camera link | One USB-C cable to the FX6: native USB, or a built-in adapter as the fallback |
| Power | V-lock plate on the back. Hot-swap is possible with an optional small internal buffer battery |
| Runtime | Roughly 10–12 h on a 98 Wh V-mount (estimate: about 7 W draw) |
| Mounting | One centred ¼"-20 on top, one centred ⅜"-16 underneath with ARRI-style anti-twist pins. Brass inserts, set back toward the balance point |
| Right side | Under a drip lip: locking USB-C camera port, etherCON LAN, full-size HDMI out, power button |
| Enclosure | 3D-printed PETG or ASA, matte black. Sealed top, intake underneath, exhaust louvres on the left, rubber feet. Printed sunhood clip-on option |
| Cooling | Passive through the aluminium V-lock plate. A quiet 40 mm fan runs only when hot: Auto, Quiet or Off |
| Weight | ≈ 400 g without battery (estimate) |